Home > 911 Suspension > Coilover Kits and Parts > Coilover kits

Von Shocks™ Coilover Systems

For Porsche 911/912/930

Von Shocks Front Coilover Struts For Porsche 911
Von Shocks Front Coilover Struts For Porsche 911
Von Shocks Front Coilover Struts For Porsche 911

Front Coilovers

Complete Von Shocks™ Front Coilover System fully engineered and ready to bolt on. No guesswork. Tuned spring rates, shock valving, spring lengths that all work together right out of the box.

Levels - Choose from 4 levels, each tuned with springs and valving matched to your planned usage:

level 1 - Street performance, canyon carver

level 2 - Autocross, Drivers Education

level 3 - Time trial

level 4 - Dedicated race car

Front Coilover system is based on the RSR strut with threaded body.

Raised spindle height - Choose between +19mm, 30mm and 40mm height. Changing the spindle height is the right way of lowering the 911 car. It improves the suspension travel (bottoming out) and improves the geometry.

Extended upper spring perch with friction free bearings - More clearance allows for more camber by preventing spring from contacting chassis. Spring seat bearings are included for smooth action. These seat bearings prevent spring windup. Coilovers without this bearings can make the steering feel very heavy as the spring fights to re-center the steering. Needle bearings prevent the coil windup, and lighten the steering feel.

Double steering knuckle - Holds tie rod end between two steering knuckles to eliminate knuckle flex.

Bump steer adjustable - Included is a racing bump steer kit which allows for massive tie rod adjustment range. Weather sealed rods ends included work with regular and turbo tie rods.

Von Shock™ insert - Our own Von Shock Street insert is included. Valved for performance level selected. Each and every shock is computer shock dyno-tested. Dyno plots are then used to choose hand-picked pairs, thus delivering unrivaled consistency and shocks that truly match.

Porsche 911 Suspension Upgrade

"I knocked 10 seconds off my best time @ Sebring with your suspension products, I could not be happier with the results." Dave D. - 911 Suspension Upgrade

 

Rear Coilovers

Just like the fronts, Rear Coilover System is fully engineered and ready to bolt on. No guesswork. Tuned spring rates, shock valving, spring lengths that all work together right out of the box.

Levels - Choose from 4 levels, each tuned with springs and valving matched to your planned usage. Please refer the table above.

Fixed System - This is a perfectly balanced system with fixed rebound and compression rate. Tuned based on selected performance level chosen. This system features extended upper perch for clearance ( '65-'71 911s require Super-extended perch).

Superb Springs - We use 2.25 inch Hypercoil springs. The same springs that are found on Indycars, ALMS, Grand Am and more. They typically measure within 1% of labeled rate. Hypercoils have a Life-Time Guarantee that coils remain within 2% of the original manufacturing tolerances.

All of our coilover kits also include Helper springs. Front and rear. These springs have a very low rate and collapse under the car's weight. Their purpose is to keep the main spring tensioned when the wheel goes to full droop under hard cornering (lifted wheel), over bumps, and on the jack.

Spring dividers are used between main and helper springs. They keep both springs properly aligned and centered on the shock/strut body.

Von Shocks Front Coilover Struts For Porsche 911

Build Quality - Our coilover kits are track proven. Engineered and manufactured with the highest quality standards, each set is hand built to exact specifications of every order. All orders include actual dyno charts, documentation and certification.

Adjust Ride Height - Achieve the perfect ride height and corner balance by raising or lowering the lower perch. Compact design of the threaded sleeve fits 2.25 inch springs for superior tire clearance.

Part No.OEM EquivalentFitConfig
2311201'72 - '89Front gas-adjustable /Level 1, 19mm spindle, stock type camber plates
2311202'72 - '89Front gas-adjustable /Level 2, 19mm spindle, stock type camber plates
2311203'72 - '89Front gas-adjustable /Level 3, 19mm spindle, stock type camber plates
2311204'72 - '89Front gas-adjustable /Level 4, 19mm spindle, stock type camber plates
2312201'72 - '89Front gas-adjustable /Level 1, 19mm spindle, with QuickChange type camber plates
2312202'72 - '89Front gas-adjustable /Level 2, 19mm spindle, with QuickChange type camber plates
2312203'72 - '89Front gas-adjustable /Level 3, 19mm spindle, with QuickChange type camber plates
2312204'72 - '89Front gas-adjustable /Level 4, 19mm spindle, with QuickChange type camber plates
2311301'72 - '89Front gas-adjustable /Level 1, 30mm spindle, with Stock type camber plates
2311302'72 - '89Front gas-adjustable /Level 2, 30mm spindle, with Stock type camber plates
2311303'72 - '89Front gas-adjustable /Level 3, 30mm spindle, with Stock type camber plates
2311304'72 - '89Front gas-adjustable /Level 4, 30mm spindle, with Stock type camber plates
2312301'72 - '89Front gas-adjustable /Level 1, 30mm spindle, with QuickChange type camber plates
2312302'72 - '89Front gas-adjustable /Level 2, 30mm spindle, with QuickChange type camber plates
2312303'72 - '89Front gas-adjustable /Level 3, 30mm spindle, with QuickChange type camber plates
2312304'72 - '89Front gas-adjustable /Level 4, 30mm spindle, with QuickChange type camber plates
2311401'72 - '89Front gas-adjustable /Level 1, 40mm spindle, with Stock type camber plates
2311402'72 - '89Front gas-adjustable /Level 2, 40mm spindle, with Stock type camber plates
2311403'72 - '89Front gas-adjustable /Level 3, 40mm spindle, with Stock type camber plates
2311404'72 - '89Front gas-adjustable /Level 4, 40mm spindle, with Stock type camber plates
2312401'72 - '89Front gas-adjustable /Level 1, 40mm spindle, with QuickChange type camber plates
2312402'72 - '89Front gas-adjustable /Level 2, 40mm spindle, with QuickChange type camber plates
2312403'72 - '89Front gas-adjustable /Level 3, 40mm spindle, with QuickChange type camber plates
2312404'72 - '89Front gas-adjustable /Level 4, 40mm spindle, with QuickChange type camber plates

Part No.OEM EquivalentFitConfig
2311501'72 - '89Front sealed gas /Level 1, 19mm spindle, with stock type camber plates
2311502'72 - '89Front sealed gas /Level 2, 19mm spindle, with stock type camber plates
2311503'72 - '89Front sealed gas /Level 3, 19mm spindle, with stock type camber plates
2311504'72 - '89Front sealed gas /Level 4, 19mm spindle, with stock type camber plates
2311501'72 - '89Front sealed gas /Level 1, 19mm spindle, with QuickChange type camber plates
2311502'72 - '89Front sealed gas /Level 2, 19mm spindle, with QuickChange type camber plates
2311503'72 - '89Front sealed gas /Level 3, 19mm spindle, with QuickChange type camber plates
2311504'72 - '89Front sealed gas /Level 4, 19mm spindle, with QuickChange type camber plates
2311601'72 - '89Front sealed gas /Level 1, 30mm spindle, with stock type camber plates
2311602'72 - '89Front sealed gas /Level 2, 30mm spindle, with stock type camber plates
2311603'72 - '89Front sealed gas /Level 3, 30mm spindle, with stock type camber plates
2311604'72 - '89Front sealed gas /Level 4, 30mm spindle, with stock type camber plates
2312601'72 - '89Front sealed gas /Level 1, 30mm spindle, with QuickChange type camber plates
2312602'72 - '89Front sealed gas /Level 2, 30mm spindle, with QuickChange type camber plates
2312603'72 - '89Front sealed gas /Level 3, 30mm spindle, with QuickChange type camber plates
2312604'72 - '89Front sealed gas /Level 4, 30mm spindle, with QuickChange type camber plates
2311701'72 - '89Front sealed gas /Level 1, 40mm spindle, with stock type camber plates
2311702'72 - '89Front sealed gas /Level 2, 40mm spindle, with stock type camber plates
2311703'72 - '89Front sealed gas /Level 3, 40mm spindle, with stock type camber plates
2311704'72 - '89Front sealed gas /Level 4, 40mm spindle, with stock type camber plates
2312701'72 - '89Front sealed gas /Level 1, 40mm spindle, with QuickChange type camber plates
2312702'72 - '89Front sealed gas /Level 2, 40mm spindle, with QuickChange type camber plates
2312703'72 - '89Front sealed gas /Level 3, 40mm spindle, with QuickChange type camber plates
2312704'72 - '89Front sealed gas /Level 4, 40mm spindle, with QuickChange type camber plates

Part No.OEM EquivalentFitConfig
2313001'72 - '89Rear gas pressure-adjustable /Level 1
2313002'72 - '89Rear gas pressure-adjustable /Level 2
2313003'72 - '89Rear gas pressure-adjustable /Level 3
2313004'72 - '89Rear gas pressure-adjustable /Level 4
2313001'65 - '71Rear gas pressure-adjustable /Level 1
2313002'65 - '71Rear gas pressure-adjustable /Level 2
2313003'65 - '71Rear gas pressure-adjustable /Level 3
2313004'65 - '71Rear gas pressure-adjustable /Level 4

Part No.OEM EquivalentFitConfig
2310101'72 - '89Rear non-adjustable Level 1
2310102'72 - '89Rear non-adjustable Level 2
2310103'72 - '89Rear non-adjustable Level 3
2310104'72 - '89Rear non-adjustable Level 4
2310801'65 - '71Rear non-adjustable Level 1
2310802'65 - '71Rear non-adjustable Level 2
2310803'65 - '71Rear non-adjustable Level 3
2310804'65 - '71Rear non-adjustable Level 4

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Von Race Coilover Systems

Von Race Front coilovers

$

Von Race Rear coilovers

$

Von Shock™ Coilover Systems

Von Shock™ Front coilovers

$

Von Shock™ Rear Coilovers

$

Coilover Extras

Add spindle collars/seals to front struts

$

Spindle collar and sealing ring kit, order 1 kit per car

Add spring seat bearing to rear coilovers

$

Prevents coil windup, giving precise spring rate

Add nitrogen gas fill tool

$

High pressure nitrogen fill tool for Von Race series only

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG