Home > 996/997 Suspension > Monoball Suspension Bearings

Monoball Suspension Bearings

For Porsche 996/997

Performance - Sticky tires generate corner loads that compress rubber bushings. Camber and toe wander, requiring constant driver correction to compensate.

Monoballs replace rubber with spherical bearings that hold precise camber and toe, making the car predictable and easier to drive fast.

Weather Seals - Our proprietary-design Monoball cartridges have weather seals to keep dirt out and extend product life.

Dirt and water contaminate ordinary products and accelerate wear.

For Porsche 996/997

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings. The eccentric design allows increasing or decreasing camber, as needed.

Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms of 1999-2012 Porsche 996 and 997 cars.

Lower Control Arm Eccentric Monoballs For Porsche 996/997
Lower Control Arm Eccentric Monoballs For Porsche 996/997

Increasing camber - Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Lower Control Arm Eccentric Monoballs For Porsche 996/997

Shown with factory wishbone, not included

Decreasing camber - Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street.  Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.

Part No.OEM EquivalentFitConfiguration
2260006'99 - '12

For Porsche 996/997

Control Arm Central Bushing Installation Tool For Porsche 996/997

Simplify the installation process. Our two piece cup and piston tool allows for simple central bushing extraction and insertion without removal of the control arms or use of a shop press.

The tool is designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

Part No.Stock EquivalentFitConfiguration
2260019'99 - '12

For Porsche 996/997

Cartridges install easily into stock camber plates of 996/997 cars. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball.

Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;

Camber Plate Monoball Bearings For Porsche 996/997

Shown with factory camber plate, not included

Camber Plate Monoball Bearings For Porsche 996/997

• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Part No.OEM EquivalentFitConfiguration
2011002   '99 - '12  

For Porsche 996

Upper shock mount cartridges install easily into 1999-2005 Porsche 996 cars. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.

Rear Shock Mount Toe Control Arm Monoballs for 996/997 Porsche
Part No.OEM EquivalentFitConfiguration
2011017 '99 - '05 996

For Porsche 996/997

Complete kit for the rear 996 and 997 upper control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the rear upper control arms. Includes 8 cartridges. Order 1 kit per car.

title
Part No.OEM EquivalentFitConfiguration
2260010'99 - '12

For Porsche 996/997

Complete kit for the rear 996 and 997 toe control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the rear toe control arms (track rod). Includes 2 cartridges. Order 1 kit per car.



Track Rod Concentric Monoballs (Rear) for Porsche 996/997
Part No.OEM EquivalentFitConfiguration
2260014'99 - '12

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Front Suspension

Camber Plate Monoball Bearings

$

For Porsche 996/997 '99-'12. Order 1 kit per car

Front Lower Control Arm Eccentric Monoballs

$

For Porsche 996/997 '99-'12. Order 1 kit per car

Rear Suspension

Shock Mount Monoball Cartridge

$

For Porsche 996 '99-'05. Order 1 kit per car

Rear Lower Control Arm Eccentric Monoballs

$

For Porsche 996/997 '99-'12. Order 1 kit per car

Rear Upper Control Arm Concentric Monoballs

$

For Porsche 996/997 '99-'12

Rear Toe Control Arm (track Rod) Monoballs (Rear)

$

For Porsche 996/997 '99-'12. Order 1 kit per car

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG