Home > 993 Suspension > Rubber Bushings

Rubber Bushings

For Porsche 993

Restore, renew, improve - Rubber bushings give years of trouble free performance, and with 993 now 15+ years old they are ready for replacement. Our replacement bushings are a critical part of any suspension refresh or upgrade.

Stock or Sport Hardness - Many of our bushings are available in a sport-hardness rubber. Sport bushings are firmer rubber, offering an intermediate step between stock rubber and our top performing monoball products.

See also Monoball Bushing Replacements and Re-bushing Services

Front Strut Upper Mounts

Factory replacement for failing and/or squeeking Porsche 993 upper front strut mounts

Genuine Porsche® part.
Priced each, order 2 per car.
Part # 993 343 018 00



Part No. Stock Equivalent Fit Configuration
99334301800 993-343-018-00 '95 - '98 Factory replacement

Rear Shock Upper Mounts

Factory replacement for failing and/or squeeking Porsche 993 upper rear shock mounts

Genuine Porsche® part.
Priced each, order 2 per car.
Part # 993 333 059 01



Part No. Stock Equivalent Fit Configuration
99333305901 993-333-059-01 '95 - '98 Factory replacement

Front Control Arm Front bushing

We see this bushing fail with great regularity on 993 cars. Failures seem mileage independent, the rubber deteriorates due to age. The symptom is vibration felt in the steering wheel.

Stock-hardness - Restores performance and ride quality to original.

Sport-Hardness - Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.

Front Contol Arm Bushings

Part No. Stock Equivalent Fit Configuration
2290007 '95 - '98 Stock Hardness
2290008 '95 - '98 Sport Hardness

Front Control Arm Rear bushing

The front control arm rear bushing is comprised of 2 halves for each arm. Kit includes bushings for two arms.

Stock-hardness - Restores performance and ride quality to original.

Sport-Hardness - Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.

Front Control Arm Rear bushings

Part No. Stock Equivalent Fit Configuration
2290010 '95 - '98 Stock Hardness
2290011 '95 - '98 Sport Hardness


Also see our Split Bushings Removal Tool to simplify the removal of old bushings.

Running out of rear toe adjustment range is a common problem on lowered 993 cars. The bore on these bushings is offset by 6mm effectively shortening or increases the length of the toe link and bringing the toe adjustment back into range.

Track Rod Bushings

Until now, replacing the toe links with more expensive adjustable length toe arms was the only solution to the problem. These bushings get the job done at a much lower cost.

Track Rod Eccentic Bushings For Porsche 996/997

Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the stock rubber.

Decrease toe in – Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.

Increase toe in – Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.

Part No. Stock EquivalentFitConfiguration
2290032'95 - '98 993, sold as pair

Replaces the track arm bushings. Each arm has 1 rubber bushing, for a total of 2 bushings per car. This kit the pair. Available in Stock and Sport hardness.

Track Rod Bushings

Track Rod Concentric Bushings For Porsche 996/997
Part No. Stock EquivalentFitConfiguration
2290033'95 - '98 Sport Hardness, sold as pair

Rear Track arm bushing kit for 993

Replaces the rubber bushing on each of the rear 993 track arms, toe links, and control arms. Each arm has 1 rubber bushing, for a total of 6 bushings per car.

Track Arm Bushing Kit
Part No. Stock Equivalent Fit Configuration
2290036 '95 - '98 Stock Hardness, 6 pcs
2290009 '95 - '98 Sport Hardness, 6 pcs

Rear Side Panel bushing kit for 993

Replaces the rubber bushings on the rear 993 side panels.

Stock hardness - Restores performance and ride quality to original.

Sport-hardness - Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.

Each side panel has 4 rubber bushings, for a total of 8 bushings per car. This kit includes all 8 bushings, order 1 kit per car.

 
 
Rear Side Panel Bushing Kit

Part No. Stock Equivalent Fit Configuration
2290016 '95 - '98 Stock Hardness
2290017 '95 - '98 Sport Hardness

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Front Suspension Rubber Bushings

Front Strut Upper Mounts

$

Qty 2 needed per car

Front control arm Front bushing, 1 kit / car

$

Front control arm Rear bushing, 1 kit / car

$

Rear Suspension Rubber Bushings

Rear Shock Upper Mounts

$

Qty 2 needed per car

Toe Control Arm (track rod) Bushings

$

993 Rear track arm rubber bushing, 1 kit / car

$

993 Rear side panel rubber bushing, 1 kit / car

$

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG