Home > 996/997 Suspension > Rubber Suspension Bushings

Rubber Suspension Bushings

For Porsche 996/997

Restore, renew, improve - Rubber bushings give years of trouble free performance, and with some 996s now approaching 15 years old they are ready for replacement. Our replacement bushings are a critical part of any suspension refresh or upgrade.

Stock or Sport Hardness - Many of our bushings are available in a sport-hardness rubber. Sport bushings are firmer rubber, offering an intermediate step between stock rubber and our top performing monoball products.

For Porsche 996/997

This is an stock front strut camber plate for Porsche 996/997 with rubber bushings pressed in. Replace your fatigued bushings to restore original ride quality with this product or increase performance by replacing it with either our Camber Plate Monoball Cartridge or QuickChange Adjustable Camber Plates

Front Strut Camber Plate Bushings For Porsche 996/997
Part No.Stock EquivalentFitConfiguration
997 343 018 01'99 - '12C2 non-turbo
997 343 015 02'99 - '12 C4, turbo, left side
997 343 01 602'99 - '12 C4, turbo, right side

For Porsche 996/997

This is an stock rear shock upper mount for Porsche 996/997 with rubber bushings. Replace your fatigued bushings to restore original ride quality with this product or increase performance by replacing it with either our Rear Shock Mount Kit or Rear Shock Mount Monoball Cartridge.

Rear Shock Upper Mounts
Part No.Stock EquivalentFitConfiguration
996 333 059 03 '99 - '05 996Factory replacement
997 333 061 02'05 - '12 997Factory replacement

For Porsche 996/997

Running out of rear toe adjustment range is a common problem on lowered 996/997 cars. The bore on these bushings is offset by 6mm effectively shortening or increases the length of the toe link and bringing the toe adjustment back into range.

Track Rod Bushings

Until now, replacing the toe links with more expensive adjustable length toe arms was the only solution to the problem. These bushings get the job done at a much lower cost.

Track Rod Eccentic Bushings For Porsche 996/997

Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the stock rubber.

Decrease toe in – Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.

Increase toe in – Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.

Part No. Stock EquivalentFitConfiguration
2290032'99 - '12

For Porsche 996/997

Replaces the track arm bushings. Each arm has 1 rubber bushing, for a total of 2 bushings per car. This kit the pair. Available in Stock and Sport hardness.

Track Rod Bushings

Track Rod Concentric Bushings For Porsche 996/997
Part No. Stock EquivalentFitConfiguration
2290033 '99 - '12 Sport hardness

For Porsche 996/997

Replaces the rubber bushing on each of the rear 996/997 upper control arms. Each arm has 2 rubber bushings, for a total of 8 bushings per car. This kit includes all 8. Available in Stock and Sport hardness.

Upper Control Arm Concentric Bushings

Upper Control Arm Concentric Bushings For Porsche 996/997
Part No.Stock EquivalentFitConfiguration
2290030'99 - '12 Stock Hardness
2290031'99 - '12 SPORT Hardness

For Porsche 996/997

Replace your tired wishbone inner bushings with our original equipment-type rubber replacements to restore original ride and performance. Rubber bushings are DIY installable and available for lower wishbones. Available in Stock and Sport hardness.

Sold as pair. 4 pairs needed per car.

Control Arm Inner Bushing

Control Arm Inner Bushing For Porsche 996/997
Part No.Stock EquivalentFitConfiguration
2290021'99 - '12 Stock Hardness
2290013'99 - '12 Sport Hardness

For Porsche 996/997

Central Rubber bushings for lower wishbones are available in a choice of "stock" and "sport". The sport bushings are a harder rubber compound that deforms less under load, providing improved precision and feedback. Stock is stock-spec rubber and delivers factory original ride and performance

Sold each. 4 bushings needed per car.

Control Arm Central Bushing

Control Arm Central Bushing For Porsche 996/997
Part No.Stock EquivalentFitConfiguration
2290022 '99 - '05 996 Front, '99+ 996 Rear Stock Hardness
2290014 '99 - '05 996 Front, '99+ 996 Rear Sport Hardness
2290040 '05+ 997 Front Stock Hardness
2290018 '05+ 997 Front Sport Hardness

For Porsche 996/997

Control Arm Central Bushing Installation Tool For Porsche 996/997

Simplify the installation process. Our two piece cup and piston tool allows for simple central bushing extraction and insertion without removal of the control arms or use of a shop press. The tool is designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

Part No.Stock EquivalentFitConfiguration
2260019'99 - '12

For Porsche 996/997

Replace old worn out sway bar bushings with a set of stock bushings. Available for front and Rear sway bars.

Choose from Stock (non M030 suspension upgrade) or euro GT3 street bushings.

Swaybar Rubber Bushings For Porsche 996/997
Part No.Stock EquivalentFitConfiguration
996 343 792 14 '99 - '05 Stock
996-333-792-25'98 - '12 M030
996.343.792.16'99 - '12 Euro GT3 street 27mm

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Front Bushings

$

$

Qty 2 pair per car

$

Qty 2 per car

$

Sold as pair

Rear Bushings

$

Concentric Sport Hardness, '99-'12 996/997, sold as pair, $120

$

For Porsche 996/997, 1999-2012

$

$

Qty 2 pair per car

$

Qty 2 per car

$

sold as pair

$

sold as pair

Recommended Tools

Bushing Installation & Removal Tool

$

For Porsche 996/997 front & rear LCA central bushings

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG