Home > Boxster/Cayman Suspension > Rubber Suspension Bushings

Rubber Suspension Bushings

For Porsche Boxster/Cayman

Restore, renew, improve - Rubber bushings give years of trouble free performance, and with some 986s now approaching 15+ years old they are ready for replacement. Our replacement bushings are a critical part of any suspension refresh or upgrade.

Stock or Sport Hardness - Many of our bushings are available in a sport-hardness rubber. Sport bushings are firmer rubber, offering an intermediate step between stock rubber and our top performing monoball products.

For Porsche Cayman/Boxster

Running out of rear toe adjustment range is a common problem on lowered cars. The bore on these bushings is offset by 6mm effectively shortening or increases the length of the toe link and bringing the toe adjustment back into range.

Track Rod Bushings

Until now, replacing the toe links with more expensive adjustable length toe arms was the only solution to the problem. These bushings get the job done at a much lower cost.

Track Rod Eccentic Bushings For Porsche 996/997

Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the OEM rubber.

Decrease toe in – Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.

Increase toe in – Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.

Part No.OEM EquivalentFitConfiguration
2290032'97 - '12

For Porsche Boxster/Cayman

Replaces the track arm bushings. Each arm has 1 rubber bushing, for a total of 2 bushings per car. This kit the pair. Available in Stock and Sport hardness.

Track Rod Bushings

Track Rod Concentric Bushings For Porsche Boxster/Cayman
Part No.OEM EquivalentFitConfiguration
2290033'97 - '12 SPORT hardness

For Porsche Boxster/Cayman

This is an OEM front strut camber plate for Porsche Boxster/Cayman with rubber bushings pressed in. Replace your fatigued bushings to restore original ride quality with this product or increase performance by replacing it with either our Camber Plate Monoball Cartridge or QuickChange Adjustable Camber Plates

Front Strut Camber Plate Bushings For Porsche Boxster/Cayman
Part No.OEM EquivalentFitConfiguration
1-99734301801997 343 018 01'97 - '12

For Porsche Boxster/Cayman

This is an OEM rear strut mount for Porsche Boxster/Cayman with rubber bushings pressed in. Replace your fatigued bushings to restore original ride quality with this product.

Rear Shock Mounts Bushings For Porsche Boxster/Cayman
Part No.OEM EquivalentFitConfiguration
1-98733305900987 333 059 00'97 - '12

For Porsche Boxster/Cayman

Replace your tired wishbone inner bushings with our original equipment-type rubber replacements to restore original ride and performance. Rubber bushings are DIY installable and available for lower wishbones. Available in Stock and Sport hardness.

Sold as pair. 4 pairs needed per car.

Control Arm Inner Bushing

Control Arm Inner Bushing For Porsche Boxster/Cayman
Part No.OEM EquivalentFitConfiguration
2290021'97 - '12 Stock Hardness - Qty of 4
2290013'97 - '12 Sport Hardness - Qty of 4

For Porsche Boxster/Cayman

Central Rubber bushings for lower wishbones are available in a choice of "stock" and "sport". The sport bushings are a harder rubber compound that deforms less under load, providing improved precision and feedback. Stock is OEM-spec rubber and delivers factory original ride and performance

Sold each. 4 bushings needed per car.

Control Arm Central Bushing

Control Arm Central Bushing For Porsche Boxster/Cayman
Part No.OEM EquivalentFitConfiguration
2290022'97 - '12 Stock Hardness - Qty of 4
2290014'97 - '12 Sport Hardness - Qty of 4

For Porsche 986/987/981

Control Arm Central Bushing Installation Tool For Porsche 996/997

Simplify the installation process. Our two piece cup and piston tool allows for simple central bushing extraction and insertion without removal of the control arms or use of a shop press. The tool is designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

Part No.OEM EquivalentFitConfiguration
2260019'97+

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Front Bushings

$

For Porsche Boxster/Cayman, 1997-2012

$

$

$

For Porsche Boxster/Cayman, 1997-2012, sold as pair

$

For Porsche Boxster/Cayman, 1997-2012, sold as pair

$

Qty 4 pairs needed per car

$

Qty 4 needed per car

$

sold as pair

$

sold as pair

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG