We inspect the control arms for bending, rust or other other damange. We will media blast the entire strut to remove any rust, grime and old paint. Strut is then modified to desired specification and receives a fresh coat of paint.
Send your existing Boge, Bilstein, or Koni struts to us for spindle height modification.
Raised spindles are the right way to lower your car. They restore lost suspension travel, improve the camber curve and roll center geometry.
Note that raised spindle should always use tie rod end bump steer kit to correct the steering knuckle height change.
Spindle Height - Choose from standard raised spindle heights:
Boge and koni can be raised up to 19mm maximum.
Brake Support Line Relocation - In order to raise spindles, brake lines either need to be relocated or removed. This service includes bracket relocation, however if you're planning on installing coilover sleeve conversion kit, the brackets need to be removed. Bolt-on brake line support is available as well.
Have us replace the worn out linear bearings while we have the struts here. Parts are included with this service. Bilstein Struts Only. For Bilstein Struts Only.
Send in your struts to add bump steer kit. Our racing bump steer kit comes with a lower steering knuckle that requires welding. This is a popular option for people raising their spindles.
Available is also a bolt-on bump steer kit which requires no welding.
Add gussets to reinforce the spindle. Commonly done with spindle height modification service. Gussets are welded on each side of the spindle.
OEM wiper Seals - Replace your worn out wiper seals with OEM part. For Bilstein Struts Only.
Shortening Wiper Seals - Replace your worn out wiper seals with our shortening kit
Our wiper seals shortens strut by 3/4 inch for added travel, much needed on lowered cars. Available for builstein and boge struts.
Not needed if getting coilover conversion kit, as these are already included with the kit. For Bilstein Struts Only.
Have us install the seal-races while we have the struts here. Parts are included with this service.
1. Order Services using table below. We'll email a work order.
2. Send your struts using your choice of inbound shipping options. Include work order in the box.
3. We'll perform the installation and upgrades.
4. We'll ship the struts back to you ready to bolt on the car.
Ground service is default. Call to arrange expedited shipping.