Home > 911 Suspension > Torsion Bars

Torsion Bars

For Porsche 911/912/930

Plated & Plugged Hollow Torsion Bars

Plated & Plugged Hollow Torsion Bars

Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.

Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.

  • • Hollow, light weight
  • • Plated & Plugged
  • • Consistent spring rate
  • • Great spline fit

Replaces OEM Part: 911 333 101 12

911 Torsion Bar Upgrade

"After a few slow laps around town, we hit the side roads for some spirited driving. My Porsche responded immediately like it was on rails. No drama, no squealing tires, no understeer, and no body roll. It was sublime... I'm exceptionally pleased the way things turned out." Jack W. - Torsion Bar Upgrade

 

Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.

The size given is a solid-bar-equivalent. Actual hollow bar measures about .5mm larger

Torsion Bar Plugged and Plated

QuickChange Hollow Torsion Bars

QuickChange Torsion Bars

QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.

Use the rears bars in combination with our QuickChange Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

QuickChange Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).

A QuickChange Insert is available separately for converting your existing hollow torsion bars.

Quickchange Torsion Bar

Sway-A-Way Solid Torsion Bars

Solid bars provide a good solution for suspension builds on a more modest budget. Lacking the benefits of our high-end products, they still deliver the basic torsion bar sizing needed to customize your performance.

Sway-A-Way hollow torsion bars

Sway-A-Way Hollow Torsion Bars

Hollow Sway-a-way bars provide a good solution for suspension builds on a more modest budget. Lacking the benefits of our high-end products, they still deliver the basic torsion bar sizing needed to customize your performance.

Sway-a-Way Solid Torsion Bars

Related Products and Services

QuickChange Insert - A QuickChange Insert is available separately for converting your existing hollow torsion bars.

Part No.OEM EquivalentFitConfiguration
1-PP911F19'65 - '89 Plated & Plugged Hollow Front Torsion Bar 19mm
1-PP911F20'65 - '89 Plated & Plugged Hollow Front Torsion Bar 20mm
1-PP911F21'65 - '89 Plated & Plugged Hollow Front Torsion Bar 21mm
1-PP911F22'65 - '89 Plated & Plugged Hollow Front Torsion Bar 22mm
1-PP911F23'65 - '89 Plated & Plugged Hollow Front Torsion Bar 23mm
1-PP911F24'65 - '89 Plated & Plugged Hollow Front Torsion Bar 24mm

Part No.OEM EquivalentFitConfiguration
2092020'65 - '89 QuickChange Hollow Front Torsion Bars 20mm
2092021'65 - '89 QuickChange Hollow Front Torsion Bars 21mm
2092022'65 - '89 QuickChange Hollow Front Torsion Bars 22mm
2092023'65 - '89 QuickChange Hollow Front Torsion Bars 23mm
2092024'65 - '89 QuickChange Hollow Front Torsion Bars 24mm

Part No.OEM EquivalentFitConfiguration
1-SAW911F21'65 - '89 Sway-a-Way Solid Front Torsion Bar 21mm
1-SAW911F22'65 - '89 Sway-a-Way Solid Front Torsion Bar 22mm
1-SAW911F23'65 - '89 Sway-a-Way Solid Front Torsion Bar 23mm

Part No.OEM EquivalentFitConfiguration
1-sAW911F21H'65 - '89 Sway-a-Way Hollow Front Torsion Bar 21mm
1-SAW911F22H'65 - '89 Sway-a-Way Hollow Front Torsion Bar 22mm
1-SAW911F23H'65 - '89 Sway-a-Way Hollow Front Torsion Bar 23mm

Part No.OEM EquivalentFitConfiguration
1-PP911R26911-333-101-12'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 26mm
1-PP911R27'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 27mm
1-PP911R28'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 28mm
1-PP911R29'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 29mm
1-PP911R30'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 30mm
1-PP911R31'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 31mm
1-PP911R33'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 33mm
1-PP911R34'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 34mm
1-PP911R36'65 - '86 Plated & Plugged Hollow Rear Torsion Bar 36mm
1-PP911RT26'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 26mm - for G50 Trans
1-PP911RT27'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 27mm - for G50 Trans
1-PP911RT28'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 28mm - for G50 Trans
1-PP911RT29'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 29mm - for G50 Trans
1-PP911RT30'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 30mm - for G50 Trans
1-PP911RT31'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 31mm - for G50 Trans
1-PP911RT33'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 33mm - for G50 Trans
1-PP911RT34'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 34mm - for G50 Trans
1-PP911RT36'87 - '89 Plated & Plugged Hollow Rear Torsion Bar 36mm - for G50 Trans

Part No.OEM EquivalentFitConfiguration
2102026'65 - '86 QuickChange Hollow Rear Torsion Bars 26mm
2102027'65 - '86 QuickChange Hollow Rear Torsion Bars 27mm
2102028'65 - '86 QuickChange Hollow Rear Torsion Bars 28mm
2102029'65 - '86 QuickChange Hollow Rear Torsion Bars 29mm
2102030'65 - '86 QuickChange Hollow Rear Torsion Bars 30mm
2102031'65 - '86 QuickChange Hollow Rear Torsion Bars 31mm
2102033'65 - '86 QuickChange Hollow Rear Torsion Bars 33mm
2102034'65 - '86 QuickChange Hollow Rear Torsion Bars 34mm
2102036'65 - '86 QuickChange Hollow Rear Torsion Bars 36mm
2102126'87 - '89 QuickChange Hollow Rear Torsion Bars 26mm - for G50 Trans
2102127'87 - '89 QuickChange Hollow Rear Torsion Bars 27mm - for G50 Trans
2102128'87 - '89 QuickChange Hollow Rear Torsion Bars 28mm - for G50 Trans
2102129'87 - '89 QuickChange Hollow Rear Torsion Bars 29mm - for G50 Trans
2102130'87 - '89 QuickChange Hollow Rear Torsion Bars 30mm - for G50 Trans
2102131'87 - '89 QuickChange Hollow Rear Torsion Bars 31mm - for G50 Trans
2102133'87 - '89 QuickChange Hollow Rear Torsion Bars 33mm - for G50 Trans
2102134'87 - '89 QuickChange Hollow Rear Torsion Bars 34mm - for G50 Trans
2102136'87 - '89 QuickChange Hollow Rear Torsion Bars 36mm - for G50 Trans

Part No.OEM EquivalentFitConfiguration
1-SAW911R26'65 - '86 Sway-a-Way Solid Rear Torsion Bar 26mm
1-SAW911R27'65 - '86 Sway-a-Way Solid Rear Torsion Bar 27mm
1-SAW911R28'65 - '86 Sway-a-Way Solid Rear Torsion Bar 28mm
1-SAW911R29'65 - '86 Sway-a-Way Solid Rear Torsion Bar 29mm
1-SAW911R30'65 - '86 Sway-a-Way Solid Rear Torsion Bar 30mm

Part No.OEM EquivalentFitConfiguration
1-SAW911R26H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 26mm
1-SAW911R27H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 27mm
1-SAW911R28H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 28mm
1-SAW911R29H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 29mm
1-SAW911R30H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 30mm
1-SAW911R31H'65 - '86 Sway-a-Way Hollow Front Torsion Bar 31mm

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Front Torsion Bars

Plated & Plugged Hollow front torsion bar - Pair

$

choose size 911/912/930 and 914-6

QuickChange Hollow front torsion bar - Pair

$

choose size 911/912/930 and 914-6

Sway-a-Way Solid Front Torsion Bar - Pair

$

choose size 911/912/930 and 914-6

Sway-a-Way Hollow Front Torsion Bar - Pair

$

choose size 911/912/930 and 914-6

Rear Torsion Bars

Plated & Plugged Hollow rear torsion bar - Pair

$

Select Trans Choose Size

QuickChange rear torsion bar - pair

$

Select Trans Choose Size

Sway-a-Way Solid Rear Torsion Bar - Pair

$

choose size 65-'86 911/912/914 & '75-'88 930

Sway-a-Way Hollow Rear Torsion Bar - Pair

$

choose size '65-'86 911/912/914 & '75-'88 930

Related Products and Services

QuickChange Insert Front - Pair

$

For converting regular front hollow torsion bars

QuickChange Insert Rear - Pair

$

For converting regular Rear hollow torsion bars

Package Total

$
Elephant Racing on Twitter
Elephant Racing on Instagram
Elephant Racing on YouTube
Elephant Racing on Facebook

+1 408.297.2789 / Fast Shipping Worldwide

© 2004-2017 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG