Oil Hose Adapters, Unions, and Fittings

The thermo probe plug is available for applications that aren’t utilizing the thermo sensor. It installs in the cooler where the sensor would otherwise mount and is necessary to block the passage and prevent oil loss.

Complete with an rubber edge seal to prevent oil leaks.

30mm Male Ends

Useful for attaching two 30mm female threaded hose ends together. Union has 30mm male threads on both sides.

Save Expensive Thermostats And Oil Lines

It’s a common problem when removing oil lines from the external thermostat. The aluminum thermostat threads become fused to the steel tube nut that secures the oil lines. If you get enough leverage to force the nut free, it takes the aluminum threads along with it – destroying the expensive thermostat and the oil line.

Elephant Racing has the solution; we are manufacturing a 30mm tube nut replacement kit that let’s you save thermostats and oil lines. If your oil lines won’t come free from the thermostat, use a cut-off wheel to slit the side of the tube nut. You can then break the nut free using a cold chisel. This technique sacrifices the tube nut to save the expensive thermostat.

You then use our kit to replace the tube nut that was cut off. Both the oil line and the thermostat are saved.

Brass Swivel Fitting

911 cars through ’71 and all 914/6 cars have 26mm fittings on the oil tank. This presents a problem when retrofitting a ’72 and later 911 motor that use 30mm oil hoses.

These 26mm-to-30mm adapters solve this. They have female 26mm threads that connect directly to the 26mm male fitting on your pre-72 911 or 914/6 oil tank. The other side is male 30mm threads and connects directly to 30mm female threaded hose ends.

• “Just want to say, thanks! You guys really created a great product that fills a serious void!” Kyle G., IE – Thermostat Fittings

Widemouth Oil Cooler Fitting

Straight-cut male M22 thread fits the engine case scavenge port, Carrera and C2/993 oil coolers, Setrab and Mocal coolers with threaded fittings.

• M22 side uses the included crush washer to seal.
• 30mm side fits 30mm hose ends.

Console to Thermostat Conversion

Straight-cut male M26 thread fits the 1972 Porsche 911 oil filter console and is used to convert the console to be a thermostat.

• M26 side uses the included crush washer to seal.
• 30mm side fits 30mm hose ends.

AN-4 thru AN-16

AN fittings are available in choice of size from AN-4 to AN-16. Straight-cut male M22 thread fits the engine case scavenge port, Carrera and C2/993 oil coolers with threaded fittings, Setrab, and Mocal oil coolers.

• M22 side uses the included sealing ring.
• AN side fits standard AN hose ends.

Low Profile Setrab Fitting

Straight-cut male M22 thread fits Setrab and Mocal oil coolers. Also fits the engine case scavenge port, Carrera and C2/993 oil coolers.

This special low-profile fitting is about .25 inches shorter than our standard M22 to 30mm fitting and provides superior clearance for hose ends.

• M22 side uses the included crush washer to seal.
• 30mm side fits 30mm hose ends.