Setrab Oil Coolers

For Porsche 911, 930


 
Setrab Oil Coolers For Porsche 911, 912, 930, 914, 944

Setrab Oil Coolers

Setrab oil coolers combine high quality with high flow capacity for custom cooler applications. A variety of sizes and fitting types are available to meet your needs.STD series is available in a range of sizes and can be used in center valance, fender and other locations. Suitable for use as an engine or transaxle cooler.

Choose fittings for Porsche 30mm hoses, or AN-type fittings, order separately below.

Optionally choose our Side Mount Kit, order separately below.

Complete oil cooler kits for Porsche fitment are available here.

Setrab Oil Cooler Fitment

Setrab Oil Cooler Sizes

Setrab Oil Coolers For Porsche 911, 912, 930, 914, 944

Application Table

Part No. Stock Equiv. Fitment & Configuration
1-STD948-A:16", B:14-1/2", C:14-1/2", D:2"
qty req'd may vary
1-STD925-A:16", B:14-1/2", C:7-1/2", D:2"
qty req'd may vary
1-STD920-A:16", B:14-1/2", C:6", D:2"
qty req'd may vary
1-STD915-A:16", B:14-1/2", C:4-1/2", D:2"
qty req'd may vary
1-STD910-A:16", B:14-1/2", C:3", D:2"
qty req'd may vary
1-STD660-A:13", B: 11-1/4", C:18-1/2", D:2"
qty req'd may vary
1-STD650-A:13", B: 11-1/4", C:15-1/4", D:2"
qty req'd may vary
1-STD640-A:13", B: 11-1/4", C:12", D:2"
qty req'd may vary
1-STD634-A:13", B: 11-1/4", C:10-1/4", D:2"
qty req'd may vary
1-STD625-A:13", B: 11-1/4", C:7-1/2", D:2"
qty req'd may vary
1-STD619-A:13", B: 11-1/4", C:5-3/4", D:2"
qty req'd may vary
1-STD616-A:13", B: 11-1/4", C:4-3/4", D:2"
qty req'd may vary
1-STD613-A:13", B: 11-1/4", C:4", D:2"
qty req'd may vary
1-STD610-A:13", B: 11-1/4", C:3", D:2"
qty req'd may vary
1-STD607-A:13", B: 11-1/4", C:2", D:2"
qty req'd may vary
1-STD272-A:9-1/4", B:7-1/4", C:22-1/2", D:2", Diagonal Flow
qty req'd may vary
1-STD172-A:8-1/4", B:6-1/4", C:22-1/2", D:2"
qty req'd may vary
1-STD150-A:8-1/4", B:6-1/4", C:15-1/4", D:2"
qty req'd may vary
1-STD125-A:8-1/4", B:6-1/4", C:7-1/2", D:2"
qty req'd may vary
1-STD119-A:8-1/4", B:6-1/4", C: 5-3/4", D:2"
qty req'd may vary
1-STD113-A:8-1/4", B:6-1/4", C:4", D:2"
qty req'd may vary
1-STD110-A:8-1/4", B:6-1/4", C:3", D:2"
qty req'd may vary
1-STD107-A:8-1/4", B:6-1/4", C:2", D: 2"
qty req'd may vary
1-COM500-15-A:23-1/2", B:19-1/2", C:5-3/4", D:2-1/4"
qty req'd may vary
 
Setrab Oil Cooler Side Mount Brackets For Porsche 911, 930

Setrab Oil Cooler Side Mount Brackets

A complete bolt-on kit that allows mounting from the sides, yielding a compact installation. Allows the built-in mounting tabs to be cut off, reducing the “A” dimension of the cooler by 2 inches.

Kit includes stainless steel brackets, rubber isolators, all-metric hardware, and spacers sized specifically for mounting to the front tub of Porsche 911/930. Can be easily adapted to other fitments.

Compatible With These Coolers

Setrab Oil Cooler Side Mount Brackets For Porsche 911, 930

Application Table

Part No. Stock Equiv. Fitment & Configuration
0111101-'65-'89 911/930, Fits all 1 Series STD coolers
1 req'd per n/a
 
M22 to AN Fittings For Porsche 911, 912, 930, 944, 964, 993

M22 to AN Fittings

AN-4 thru AN-16

AN fittings are available in choice of size from AN-4 to AN-16. Straight-cut male M22 thread fits the engine case scavenge port, Carrera and C2/993 oil coolers with threaded fittings, Setrab, and Mocal oil coolers.

  • M22 side uses the included sealing ring.
  • AN side fits standard AN hose ends.
M22 to AN Fittings For Porsche 911, 912, 930, 944, 964, 993

Application Table

Part No. Stock Equiv. Fitment & Configuration
1-m22an16-M22 to AN-16 fitting
qty req'd may vary
1-m22an12-M22 to AN-12 fitting
qty req'd may vary
1-m22an10-M22 to AN-10 fitting
qty req'd may vary
1-m22an8-M22 to AN-8 fitting
qty req'd may vary
1-m22an6-M22 to AN-6 fitting
qty req'd may vary
1-m22an4-M22 to AN-4 fitting
qty req'd may vary
 
M22 to 30mm Fitting For Porsche 911, 930

M22 to 30mm Fitting

Low Profile Setrab Fitting

Straight-cut male M22 thread fits Setrab and Mocal oil coolers. Also fits the engine case scavenge port, Carrera and C2/993 oil coolers.

This special low-profile fitting is about .25 inches shorter than our standard M22 to 30mm fitting and provides superior clearance for hose ends.

  • M22 side uses the included crush washer to seal.
  • 30mm side fits 30mm hose ends.
M22 to 30mm Fitting For Porsche 911, 930

Application Table

Part No. Stock Equiv. Fitment & Configuration
0111100

Porsche part number "999 136 045 09"

M22 to 30mm fitting, Porsche part #999-136-045-09

999 136 045 09
Low-Profile Setrab Oil Cooler Fitting
qty req'd may vary

 Speak to an expert: 1.408.297.2789

Select quantities and click "Add To Cart" below

"" in Qty field below denotes qauntity needed per car

    Configuration Quantity Pricing

Oil Coolers

Setrab Oil Coolers for Porsches
Setrab Oil Coolers
$710.00 each
Setrab Oil Cooler Side Mount Brackets for Porsches
Setrab Oil Cooler Side Mount Brackets
#0111101
'65-'89 911/930, Fits all 1 Series STD coolers
1 req'd per n/a
$140.00 each

Oil fittings and unions

M22 to AN Fittings for Porsches
M22 to AN Fittings
$15.00 each
M22 to 30mm Fitting for Porsches
M22 to 30mm Fitting
#0111100
Low-Profile Setrab Oil Cooler Fitting
qty req'd may vary
$40.00 each